Evans Clean Fast Heavy Duty Washroom Cleaner
Highly efficient multi surface bactericidal cleaner. Quickly removes limescale, body fat & stubborn soil.
The trigger spray on the 750 ml bottle produces a foam to achieve longer contact time & therefore better cleaning. Suitable for use on porcelain, stainless steel, chrome, ceramic & quarry tiles. Ideal for use on washbasins, baths, showers, toilets, swimming pool surrounds, changing room floors & shower heads.
- Kills bacteria
- Passes EN 1276
- Removes body fat & scale
- Ideal for washbasins, baths, showers, tiles, toilets & floors
- Tangerine perfumed
- Pack size - 1 x 5ltr or 750ml
- Kills bacteria & cleans surfaces in one operation
- Leaves a long lasting fresh tangerine fragrance.
- Approved for ALTRO flooring.
Cleaning & Disinfecting
- Using the 750 ml trigger spray bottle, spray onto the surface & wipe with a clean damp cloth.
- For stubborn soiling & limescale, spray onto surface & leave for 30 seconds before agitating & wiping off.
- To refill the foaming spray bottle from the 5 litre container, pour undiluted.
General Cleaning
- Dilute 1:50 parts warm water (100 ml per 5 L / 3 x per 5 L).
- Damp mop floor or wipe surface with a clean cloth.
- To refill the foaming spray bottle, dilute up to 1:10 (2 x per 750 ml bottle).
NOT FOR USE ON ENAMEL BATHS, MARBLE OR LIMESTONE. FOR THESE SURFACES WE WOULD SUGGEST USING FINAL TOUCH®.
CLEAN FAST MICROBIOLOGICAL PROFILE
INTRODUCTION
CLEAN FAST is a heavy-duty washroom and general bactericidal cleaner.
CLEAN FAST has been formulated to quickly remove lime-scale, body fat and stubborn soil
from a variety of surfaces e.g. porcelain, chrome, stainless steel, ceramic and quarry tiles.
CLEAN FAST is ideal for cleaning washbasins, baths, toilets and shower cubicles, and is also
suitable for use on swimming pool surrounds and changing room floors.
CLEAN FAST has been tested and shown to be effective against a range of disease-causing
micro-organisms.
The European Standard test method EN 1276 was performed in the UKAS accredited Microbiology
Laboratory (Testing No. 1108) of Evans Vanodine International Plc.
An independent laboratory performed the test with Legionella pneumophila.
PLEASE REFER TO PRODUCT LABEL FOR HOW TO USE AND FOR ALL
RECOMMENDED USE DILUTION RATES
CONTENTS PAGE
BACTERICIDAL ACTIVITY IN SUSPENSION 2
Enterococcus hirae
Escherichia coli
Pseudomonas aeruginosa
Staphylococcus aureus
Legionella pneumophila
A glossary of microbiological and chemical terms is available on request
Activity against bacteria in suspension using
EN 1276
BACTERIA DISEASE / INFECTION
Bactericidal dilutions under
simulated “dirty conditions”*
CONTACT TIME
5 minutes
Enterococcus hirae Urinary tract infections UNDILUTED
Escherichia coli Food poisoning UNDILUTED
Pseudomonas aeruginosa Opportunistic pathogen, wound,
burn infections UNDILUTED
Staphylococcus aureus Skin, bone and wound infections UNDILUTED
Legionella pneumophila Legionnaires disease 1:50**
*As defined in EN 1276
**CLEAN FAST is suitable for disinfecting shower heads only and should not be used
in water systems for the control of Legionella.
TEST METHOD REFERENCE
EN 1276
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of
bactericidal activity of chemical disinfectants and antiseptics used in food, industrial,
domestic, and institutional areas
Designed to test bactericidal products specifically for use in the Food and Catering Industry. It is
carried out under “dirty” (representative of surfaces which are known to or may contain organic
and/or inorganic materials) and “clean” (representative of surfaces which have received a
satisfactory cleaning programme and/or are known to contain minimal levels of organic and/or
inorganic materials) conditions.
Additional contact times were used as well as the obligatory test conditions.
Test Parameters: 5 minute contact time, 20C, hard water, dirty conditions.
Bactericidal Criteria: ≥5 log reduction ≡ 99.999% reduction.